PRODUCT CARE

PRODUCT CARE GUIDE

TO KEEP YOUR GARMENT LOOKING FRESH, MAINTAINING ITS STRUCTURED FIT, AND PREVENTING ANY SHRINKAGE OR DESIGN DAMAGE, FOLLOW THESE CARE STEPS:

1. TURN INSIDE OUT

ALWAYS FLIP YOUR T-SHIRT INSIDE OUT BEFORE WASHING. THIS SHIELDS THE OUTER FACE OF THE FABRIC AND PROTECTS ANY CUSTOM GRAPHICS, PRINTS, OR EMBROIDERY FROM FRICTION AGAINST OTHER CLOTHES.

2. COLD MACHINE WASH (MAX 30°C)

WASH WITH SIMILAR COLORS USING A COLD, GENTLE CYCLE. COLD WATER PREVENTS THE COTTON FIBERS FROM SHRINKING AND KEEPS VIBRANT COLORS FROM FADING.

3. SKIP THE DRYER

LINE DRY YOUR GARMENT INSIDE OUT IN THE SHADE. DO NOT TUMBLE DRY. HIGH HEAT FROM DRYERS DAMAGES HEAVY-WEIGHT FABRICS, WARPS STRUCTURAL FITS, AND CRACKS PRINTS OR EMBROIDERY.

4. IRON WITH CARE

IF NEEDED, IRON YOUR SHIRT INSIDE OUT ON A LOW SETTING. NEVER RUN A HOT IRON DIRECTLY OVER PRINTS, EMBROIDERY, OR RAISED TEXTURES.

QUICK CARE RULES:

  • DO NOT BLEACH.
  • DO NOT DRY CLEAN.
  • AVOID HARSH DETERGENTS OR FABRIC SOFTENERS TO MAINTAIN THE FABRIC'S INTEGRITY.

HOODIE PRODUCT CARE GUIDE

TO KEEP YOUR HOODIE LOOKING FRESH, MAINTAINING ITS HEAVY-WEIGHT STRUCTURE, AND PREVENTING ANY SHRINKAGE OR DESIGN DAMAGE, FOLLOW THESE CARE STEPS:

1. ZIP UP & TURN INSIDE OUT

IF YOUR HOODIE HAS A ZIPPER, ZIP IT UP COMPLETELY TO PREVENT THE TEETH FROM SNAGGING THE FABRIC. ALWAYS FLIP THE HOODIE INSIDE OUT TO PROTECT THE OUTER FLEECE, CHENILLE PATCHES, 3D EMBROIDERY, OR PRINTS.

2. COLD MACHINE WASH (MAX 30°C)

WASH WITH SIMILAR HEAVY-WEIGHT COLORS USING A COLD, GENTLE CYCLE. COLD WATER KEEPS THE COTTON FIBERS INTACT, PREVENTS SHRINKAGE, AND STOPS THE FABRIC FROM LOSING ITS SOFTNESS.

3. SKIP THE DRYER & DRY FLAT

DO NOT TUMBLE DRY. THE INTENSE HEAT FROM DRYERS WILL SHRINK HEAVY COTTON FLEECE, WARP THE FIT, AND CRACK DESIGNS. LINE DRY INSIDE OUT IN THE SHADE, OR DRY FLAT TO PREVENT THE WEIGHT OF THE WET FABRIC FROM STRETCHING OUT THE HOOD AND SHOULDERS.

4. IRON INSIDE OUT ON LOW

IF NEEDED, IRON YOUR HOODIE INSIDE OUT ON A LOW SETTING. NEVER RUN A HOT IRON DIRECTLY OVER 3D EMBROIDERY, PUFF PRINTS, OR RAISED TEXTURES.

QUICK CARE RULES:

  • DO NOT BLEACH.
  • DO NOT DRY CLEAN.
  • AVOID FABRIC SOFTENERS (THEY CLOG THE COTTON FIBERS AND RUIN THE HEAVY-WEIGHT TEXTURE OVER TIME).

HEADWEAR PRODUCT CARE GUIDE

TO KEEP YOUR HATS LOOKING FRESH, MAINTAINING THEIR SHAPE, AND PREVENTING ANY FADING OR DESIGN DAMAGE, FOLLOW THESE CARE STEPS:

1. HAND WASH ONLY (RECOMMENDED)

DO NOT THROW YOUR HATS IN THE WASHING MACHINE OR DISHWASHER. THE AGITATION AND HEAT WILL RUIN THE BRIM, WARP THE STRUCTURE, AND DESTROY 3D EMBROIDERY. INSTEAD, FILL A CLEAN SINK WITH COLD WATER AND A SMALL AMOUNT OF MILD DETERGENT.

2. SPOT CLEAN & SOAK

USE A SOFT BRUSH (LIKE A CLEAN TOOTHBRUSH) OR A DAMP CLOTH TO GENTLY SCRUB THE SWEATBAND AND EXPOSED AREAS. TO CLEAN THE WHOLE HAT, LET IT SOAK IN THE SOAPY WATER FOR 15 TO 30 MINUTES, THEN RINSE THOROUGHLY WITH COLD WATER.

3. AIR DRY INSIDE IN THE SHADE

GENTLY PAT THE HAT WITH A TOWEL TO REMOVE EXCESS WATER—DO NOT WRING, TWIST, OR TUMBLE DRY. STUFF THE INSIDE OF THE CROWN WITH A SMALL TOWEL OR A PLASTIC CONTAINER SO IT KEEPS ITS STRUCTURAL SHAPE WHILE AIR DRYING. DRY IN THE SHADE TO PREVENT SUN FADING.

4. IRONING & SHAPE RESTORATION

NEVER RUN A HOT IRON DIRECTLY OVER HIGH-END 3D EMBROIDERY OR VENTS. IF THE CROWN WRINKLES OR LOSES SHAPE, USE A HANDHELD GARMENT STEAMER TO GENTLY STEAM THE FABRIC FROM THE INSIDE OUT WHILE SHAPING IT WITH YOUR HANDS.

QUICK CARE RULES:

  • DO NOT MACHINE WASH.
  • DO NOT BLEACH.
  • DO NOT TUMBLE DRY.
  • KEEP OUT OF DIRECT SUNLIGHT WHEN DRYING TO PREVENT COLOR BLEED.

OWT THE GATE STREETWEAR.